Food & Feed Research

Edible films and coatings – sources, properties and application

Volume 42, Issue 1
biopolymers, edible films and coatings, sources, properties, application
TOOLS Creative Commons License
Danijela Z. Šuput, Vera L. Lazić, Senka Z. Popović, Nevena M. Hromiš
1University of Novi Sad, Faculty of Technology, 21000 Novi Sad,
Bulevar cara Lazara 1, Serbia


In order to extend product shelf life while preserving the quality scientific attention focused to biopolymers research that are base for edible films and coatings production. Another major advantage of this kind of food packaging is their eco-friendly status because biopolymers do not cause environmental problems as packaging materials derived from non-renewable energy sources do. Objective of this work was to review recently studied edible films and coatings – their sources, properties and possible application. As sources for edible biopolymers were highlighted polysaccharides, proteins and lipids. The most characteristic subgroups from each large group of compounds were selected and described regarding possible physical and mechanical protection; migration, permeation, and barrier functions. The most important biopolymers characteristic is possibility to act as active substance carriers and to provide controlled release. In order to achieve active packaging functions emulsifiers, antioxidants and antimicrobial agents can also be incorporated into film-forming solutions in order to protect food products from oxidation and microbial spoilage, resulting in quality improvement and enhanced safety. The specific application where edible films and coatings have potential to replace some traditional polymer packaging are explained. It can be concluded that edible films and coatings must be chosen for food packaging purpose according to specific applications, the types of food products, and the major mechanisms of quality deterioration.


The largest part of materials used in packaging industry are produced from fossil fuels and are un-degradable. For this reason packaging materials represent a serious global environmental problem (Kirwan & Strawbridge, 2003). A big effort to extend the shelf life and enhance food quality while reducing packaging waste has encouraged the exploration of new bio-based packaging materials, such as edible and biodegradable films from renewable resources (Tharanathan, 2003). The use of these materials, due to their biodegradable nature, could at least to some extent solve the waste problem. Biodegradable packaging materials are naturally comprised of polymers that should be capable of being ultimately degraded by microorganisms through composting processes to produce natural breakdown compounds such as carbon dioxide, water, methane and biomass. There are two types of biodegradable polymers; those which are non-edible or edible (Nur Hanani et al., 2014). An edible/biodegradable film is one which is typically produced from food-derived ingredients using wet or dry manufacturing process. The resulting edible film (EF) should be a free-standing sheet that can be placed on or between food components (McHugh, 2000). In contrast, edible coatings (EC) are thin layers of edible materials which can be applied directly to the surfaces of food products by dipping, spraying or panning. Edible packaging formats can be consumed with, or as part of the food product, but they may fulfil other functions; like acting as carriers for targeted food additives (antimicrobial agents, antioxidants, flavourings, etc.). EF and EC may also be used to inhibit moisture, oxygen or carbon dioxide migration and to improve the mechanical integrity or handling characteristics of the food (O’Sullivan et al., 2006). To be accepted, an edible film should be generally recognized as safe (GRAS) and used within any limitations specified by the U.S. Food and Drug Administration (FDA). Ultimately any material that is used for direct food contact will face regulatory scrutiny, particularly biopolymers that act as carriers of additives intended to migrate to the food for preservative effects.
Functions and advantages of EF and EC (Han, 2014):
1. Edibility and biodegradability - To maintain their edibility and biodegradability, all film components should be food-grade ingredients and biodegradable (environmentally safe).
2. Physical and mechanical protection - Mechanical properties should be optimized regarding tensile strength, elongation-at-break, elastic modulus, compression strength, puncture strength, stiffness, tearing strength, burst strength, abrasion resistance, adhesion force, folding endurance, etc.
3. Migration, permeation, and barrier functions - All barrier properties are affected by film composition and environmental conditions (relative humidity and temperature).
4. Convenience and quality preservation - EF and EC can retard surface dehydration, moisture absorption, oxidation of ingredients, aroma loss, frying oil absorption, ripening/aging, and microbial deterioration of food products. They also contribute to visual quality, surface smoothness, flavour carriage, edible color printing, and other marketing-related quality factors.
5. Shelf-life extension and safety enhancement - An increased protective function of food products extends shelf life and reduces the possibility of contamination by foreign matter.
6. Active substance carriers and controlled release - Edible films and coatings can be utilized for food ingredients, pharmaceuticals, nutraceuticals, and agrochemicals in the form of capsules, microcapsules, soluble strips, flexible pouches, and coatings on hard particles.
Biodegradable films can be produced by using two basic techniques. The first technique uses wet solvent processing; commonly known as solution casting. Solution casting was developed over one hundred years ago. Using this method, solutions are spread onto leveled plates like acrylic, silicon or teflon plates, followed by a drying process at ambient conditions or under a controlled conditions: controlled relative humidity, hot air, infrared energy, microwave energy (Dangaran and Tomasula, 2009). After the 1950s, the use of extrusion was employed for the manufacture of thermoplastic polymers and extrusion became the dominant production method used for plastics manufacture. Extrusion uses elevated temperature and shear to soften and melt the polymer (resins), thereby allowing a cohesive film matrix to form (Dangaran and Tomasula, 2009).


Edible coatings and films are usually classified according to their structural material (Falguera et al., 2011). Main molecule groups as sources for EF and EC are polysaccharides, proteins and lipids. Figure 1 shows possible sources for EF and EC.



- Starch + PE



- Polyanhydrides



- Polyvinyl alcohol



- Poly-lactic acid (PLA)
















Starch & modified starch

Soy proteins


Chitin & chitosan

Pea proteins

Free fatty acids



Bees wax


Whey protein

Carnauba wax


Wheat gluten


Cellulose & modified cellulose

Corn zein

Shellac resin


Collagen & gelatins

Terpene resin




Gellan gum

Egg white protein


Xanthan gum

Fish miofibrilar protein



Peanut protein


Figure 1. Biopolymer sources
Biopolymers have multiple film-forming mechanisms, including intermolecular forces such as covalent bonds (e.g., disulfide bonds and cross linking) and electrostatic, hydrophobic, or ionic interactions. For the resulting films or coatings to be edible, the film-forming mechanism involved in fabrication should be an appropriate food process: pH modification, salt addition, heating, enzymatic modification, drying, use of food-grade solvents, or reactions with other food-grade chemicals. The nature of edible packaging films, which is rigid and brittle, causes limitations in food applications. Therefore, to overcome film’s brittleness and also to increase the workability and flexibility of these films, various types of plasticizers have been widely used (Ghasemlou et al., 2011; Parra et al., 2004). These film structures are brittle due to extensive interactions between polymer molecules (Krochta, 2002). Mechanical properties could be improved by doping some hydrophilic and hygroscopic plasticizer which can attract water molecules, as a result of having interactions between plasticizer–biopolymer instead of between biopolymer –biopolymer. The addition of plasticizers affects not only the elastic modulus and other mechanical properties, but also the resistance of EF and EC to permeation of vapours and gases (Sothornvit and Krochta, 2000, 2001).
In order to achieve active packaging or coating functions emulsifiers, antioxidants and antimicrobial agents can also be incorporated into film-forming solutions (Han, 2003). There are several categories of antimicrobials that can be potentially incorporated into edible films and coatings, including organic acids (acetic, benzoic, lactic, propionic, sorbic), fatty acid esters (glyceryl monolaurate), polypeptides (lysozyme, peroxidase, lactoferrin, nisin), plant essential oils (cinnamon, oregano, lemongrass), nitrites and sulphites, among others (Franssen & Krochta, 2003). Active function of the edible film and coating system protects food products from oxidation and microbial spoilage, resulting in quality improvement (organoleptic preference and the visual perception of quality) and enhanced safety (Kim et al., 2012; Lee et al., 2012).


1. Polysaccharide films

Polysaccharides are great materials for the formation of EC and EF, as they show excellent mechanical and structural properties, but they have a poor barrier capacity against moisture transfer (Falguera et al., 2011).


1.1. Starch and derivatives
The application of starch-based films in food packaging is promising because of their environmental appeal, low cost, flexibility and transparency (Müller et al., 2009; Bilbao-Sáinz et al., 2010). Edible films made from starch are tasteless, odourless and transparent, thus prevent a change of taste, flavour and appearance of food products (Chiumareli and Hubinger, 2012). Tensile strength and flexibility of starch films are determined by macromolecular chain mobility in the amorphous phase, amylose: amylopectin ratio, plasticizer and water content. Main advantages of starch films are excellent barrier properties to O2 and CO2. On the other hand it has weaker barrier properties to the water due to high hydrophilicity (Šuput et al., 2013).
1.2. Chitosan
Chitosan is a polysaccharide obtained by deacetylation of chitin, which is extracted from the exoskeleton of crustaceans and fungal cell walls. It has been extensively used in films and coatings due to its ability to inhibit the bacterial and fungal pathogens growth (Romanazzi et al., 2002). Chitosan interferes with the negatively charged residues of macromolecules exposed on the fungal cell surface and changes the permeability of the plasma membrane. Presence of fatty acids was also shown to enhance the antimicrobial properties of chitosan (dos Santos et al., 2012). Besides natural antimicrobial property, biodegradability, biocompatibility with human tissues, biofunction, null toxicity, chitosan has a vast potential that can be applied in the food industry (Aider, 2010). Hitosan film lack is sensitivity to environmental humidity so they have low moisture barrier, which has limited their wide use in food applications.
1.3. Pectin
Pectins are a complex group of polysaccharides in which D-galacturonic acid is a principal constituent. They are structural components of plant cell walls and also act as intercellular cementing substances. Under certain circumstances, pectin forms gels. This property has made pectins a very important additive in jellies, jams, marmalades, and confectionaries, as well as edible coatings and films (Han, 2014).
1.4. Cellulose and its derivatives
Cellulose is the major cell wall component in plants. Besides plant source cellulose, bacterial cellulose was also utilized to develop EF and EC. Due to a large number of intra-molecular hydrogen bonds cellulose is water insoluble. Etherification of cellulose results in formation of water soluble ethers: methylcellulose (MC), carboxymethylcellulose (CMC), hydroxypropylmethylcellulose (HPMC) and hydroxypropylcellulose (HPC) which have good film forming properties and are widely produced commercially (Olivas and Barbosa-Canovas, 2005). Coatings and films based on cellulose derivatives are generally transparent, flexible, odour-free, tasteless, water soluble, and resistant to O2 and CO2. WVP of these films is highly influenced by the hydrophobic: hydrophilic ratio of film components (Krochta et al., 1994; Callegarin et al., 1997). CMC has been found to reduce oil uptake in fried potatoes, particularly in combination with a blanching or calcium chloride pre-treatment. HPC can be extruded into films because of its thermoplastic characteristics. MC is a better barrier to moisture as it is less hydrophilic. However, the most interesting feature for their application in thermally treated foods, particularly in fried products, is the reversible thermal gelation capability of MC and HPMC in aqueous systems, widely utilized to reduce oil absorption during the frying of various foods, such as meat, poultry, starchy foods, doughs, etc. (Chidanandaiah Keshri et al., 2005; Rimac-Brncic et al., 2004).
1.5. Alginate
Alginate can form coatings with or without gelation through evaporation of the solvent, electrolyte cross linking (calcium) or injection of a water-miscible non-solvent for alginate. It has been used mainly for meat products, as a sacrificing agent to retard dehydration and as protection against lipid oxidation (Varela and Fiszman, 2011).
1.6. Carrageenan
Carragenan coatings can also act as sacrificing agents. They have little application in multilayered foods and are mostly used to retard microbial growth in gel matrices containing antimicrobial agents and as oxygen barriers to delay lipid oxidation in meat and precooked meat products (Varela and Fiszman, 2011).

2. Protein films

Proteins are polymers containing more than 100 amino acid residues (Nur Hanani et al., 2014) and they must be denaturated by heat, acid, alkali and/or solvent in order to form the more extended structures which are required for film formation (Bourtoom, 2008). Compared with synthetic films, protein-based films exhibit poor water resistance and lower mechanical strength. Yet, proteins are still generally superior to polysaccharides in their ability to form films with greater mechanical and barrier properties (Cuq et al., 1998). Physical and chemical properties of protein films are influenced by amino acid composition, electrostatic charge, amphyphylic properties, as well as secondary, tertiary and quaternary structure changes due to pressure, heat, irradiation, mechanical damage, acid, alkali, salt, metal ion, enzyme action etc (Krochta et al., 1994). Proteins are good film formers exhibiting excellent gas and lipid barrier properties (Popović et al., 2012), particularly at low relative humidity. Protein films are brittle and susceptible to cracking due to the strong cohesive energy density of the polymer. The cross linking of proteins by means of chemical (glutaraldehyde, formaldehyde, glyceraldehyde, glyoxal), enzymatic (transglutaminase), or physical (heating, irradiation) treatment was reported to improve the water-vapour barrier as well as the mechanical properties and resistance to proteolysis of films (Bourtoom, 2009; Ouattara et al., 2002, Senna et al., 2010).
2.1. Collagen
Collagen is the most commercially successful edible protein film. Films based on high concentrations of hydrolyzed collagen produce films with more homogeneous surfaces (Fadini et al., 2013). Collagen fibers and collagene powder were also shown to be suitable for the production of biocomposite films in a system where the fibers act as filler, exerting a reinforcement effect (Wolf et al., 2009).
2.2. Gelatin
Gelatin is produced by partial acid or alkali hydrolysis of collagen at high temperatures in the presence of water. This protein has a random configuration of polypeptide chains in aqueous solutions and gives flexible, strong films impermeable for O2 (Krochta et al., 1994). Gelatin has also been reported to possess antioxidant activity. A recent study by Gomez-Guillén et al. (2011) also revealed antimicrobial activity associated with gelatin. However, the relationship between peptide characteristics and antimicrobial activity has not been clearly demonstrated. Gennadios et al. (1994) also reported that gelatin was one of the first materials used as carrier of bioactive components. Natural antioxidants and/or antimicrobial substances were able to extend the functional properties of these biodegradable films and create an active packaging bio-material (Gómez-Guillén et al., 2011). Like other protein films, gelatin films have poor water vapour barrier properties. However, this drawback can overcome surfactant addition, such as lecithin (Andreuccetti et al., 2011).
2.3. Casein
Casein molecules easily form transparent, flexible, tasteless films from aqueous solutions without further treatment (Krochta et al., 1994; Gennadios et al., 1994). Due to a high number of polar groups casein films excellently adhere to different substrates and prevent migration of O2, CO2 and aromas (Arrieta et al., 2013). Decreased film solubility in water and improved mechanical properties were obtained through buffer treatments at the isoelectric point of these films (Chen, 2002); by cross linking the protein using irradiation (Vachon et al., 2000); through the use of transglutaminase, Trametes hirsute laccase, and Trichoderma reesei tyrosinase enzyme (Patzsch et al., 2010); or by the use of a chemical crosslinker such as formaldehyde, DL-glyceraldehyde, glutaraldehyde, or glyoxal (Audic and Chaufer, 2010; Mendes de Souza et al., 2010). Main disadvantage of casein is its relatively high price.
2.4. Gluten
Wheat gluten is a mixture of two main proteins differing in their solubility in aqueous alcohols: soluble gliadins and insoluble glutenins (Wieser, 2007). Wheat gluten films are homogenous, transparent, strong and good water barriers. The development of edible coatings or films with selective gas permeability is very promising for controlling respiratory exchange and improving the conservation of fresh or minimally processed fruits and vegetables (Tanada-Palmu and Grosso, 2005). The rheological properties of gluten films can be altered from smooth to rubber like by high pressure treatment (Koehler et al., 2010).
2.5. Zein
Zein is a hydrophobic protein found in maize, obtained as a by-product of the bioethanol and oil industry. It is traditionally used as a coating material in the confectionary industry (Arcan, and Yemenicioglu, 2011). It consists of alcohol-soluble proteins (Padua and Wang, 2002). Zein is rich in nonpolar amino acids, which contribute to water insolubility and improve the water vapor barrier of films (Dangaran et al., 2009). Physico-chemical properties of alcoholic zein solutions are highly influenced by a concentration of alcohol, which, in turn, affects film properties. Interest is growing in incorporating antioxidant and antimicrobial agents into zein coatings or films to produce functional films for food application (Lungu and Johnson, 2005). Treatment of film-forming solutions by gamma irradiation can improve the water barrier properties, color, and appearance of zein films (Soliman et al., 2009).
3. Lipid films
The efficiency of lipid materials in edible films and coatings depends on the nature of the lipid used, and in particular on its structure, chemical arrangement, hydrophobicity, physical state (solid or liquid), and lipid interactions with the other components of the film (Rhim and Shellhammer, 2005). Lipids are usually combined with other film-forming materials, such as proteins or polysaccharides, as emulsion particles or multilayer coatings in order to increase the resistance to water penetration (Mehyar et al., 2012). Polar resin films are good barriers for O2, CO2 and ethylene. Hydrophobic substances potentially used for the lipid-based edible films and coatings include natural waxes (carnauba, candelilla, rice bran and beeswax); petroleum-based waxes (paraffin and polyethylene wax); petroleum-based, mineral, and vegetable oils; acetoglycerides and fatty acids; and resins, such as shellac and wood rosin (Rhim and Shellhammer, 2005).
Wax is the collective term for a series of naturally or synthetically produced nonpolar substances. Waxes either have no polar constituents or possess a hydrophilic part so small or so buried in the molecule that it cannot readily interact with water, thereby preventing the molecule from spreading to form a monolayer on the surface. Their high hydrophobicity, which makes them insoluble in bulk water and soluble in typical organic solvents, explains why waxes are the most efficient barriers to water-vapour transfer (Han, 2014). The most common method for making wax microemulsions is the water-to-wax method, in which water is added to the molten wax and/or resin in the presence of the fatty acid and a base to invert the emulsion to wax-in-water (Hagenmaier and Baker, 1994). These formulations add a good gloss to fruits and vegetables, but limitations to their use are poor mechanical properties and oily appearance in some products.


Prior to the application of biopolymers, some factors need to be considered such as microbiological stability, solubility, transparency, wettability, oil and grease resistance, cohesion, mechanical properties, sensory and permeability to water vapourand gases. Preparation of biodegradable and/or edible films involves the use of at least one film-forming agent (macro-molecule), a solvent and a plasticizer. The optimization of edible films composition is in one of the most important steps of the research in this field, since they must be formulated according to the properties of the food to which they have to be applied (Rojas-Grau et al., 2009). Table 1 summarises numerous recent researches on EF and EC applications.
Table 1.Application of Edible Films and CoatingsPotpis tabele

Materials for EF and EC



Fruits and vegetables


Cassava starch


Garcia et al., 2012



Silva et al., 2012

Corn starch+beeswax


Pérez-Gallardo et al., 2012



Qiu et al., 2012



Ghasemnezhad et al., 2013



Alvarez et al., 2013


Sliced apple

de Britto and Assis, 2012



Ferrari et al.,  2013



Ayala-Zavala et al., 2013



Moalemiyan et al., 2012


Dried pineapple

Talens et al., 2012



Jiang, 2013



Diaz-Mula et al., 2012



Neves et al., 2012

Meats, poultry, fish




Zhang et al., 2012



Krkić et al., 2012


Chilled hake

Lopez de Lacey et al., 2012


Dried fish

Matan, 2012


Frozen salmon

Kim et al., 2012

Red algae


Shin et al., 2012


Bakery, snacks and dairy



Fried potato chips

Garmakhany et al., 2012



Ramos et al., 2012

Red algae


Shin et al., 2012

1. Fresh and minimally processed fruits and vegetables

In the case of fruits and vegetables, coatings are used to prevent weight loss (retain moisture), inhibit microorganisms, slow down aerobic respiration, and improve appearance by providing gloss. Edible coatings for fresh fruits are useful for controlling ripeness by reducing oxygen penetration into the fruit, thus reducing metabolic activity and softening changes (Conforti and Zinck, 2002). In the literature, many reviews bring together the effect of new edible emulsion coatings on storability and postharvest quality of fresh fruits and vegetables (Lin and Zhao, 2007; Valencia-Chamorro et al., 2011). Similarly, interest in the use of edible coatings in fresh-cut fruits and vegetables has grown, since these coatings can also act as carriers of food-grade antioxidants and antimicrobials that help reduce enzymatic browning and microbial growth (Rojas-Grau et al., 2009).


2. Meat, poultry and fish products

Natural collagen casings from animal intestine represent one of the earliest uses of edible protein packaging materials (McHugh and Avena-Bustillos, 2012). Studies of colagen edible films have shown their potential to reduce moisture loss, minimize lipid oxidation, prevent discoloration, and reduce dripping of muscle foods (Gennadios et al., 1997). In addition, incorporation of antimicrobials into edible coatings, gels, or films can also help control the safety of meat products (Cutter, 2006). Edible coatings can be applied to meat and fish products by dipping, spraying, casting, rolling, brushing, and foaming. Edible coatings can also be used to reduce fat uptake during deep frying of meat (Dragich and Krochta, 2010) and drip loss during thawing of salmon (Rodriguez-Turienzo et al., 2011).


3. Cereals, bakery and dairy coatings

In this sense, edible coatings are used in cereal products to prevent hydration and improve quality (McHugh and Avena-Bustillos, 2012). Rice fortified with vitamins and minerals has been coated with zein-wood rosin mixtures to prevent vitamin and mineral losses during washing in cold water (Padua and Wang, 2002). Emulsified edible coatings composed of corn starch, MC, and soybean oil extended the shelf life of coated crackers stored at 65%, 75%, and 85% RH compared to uncoated ones by reducing moisture uptake (Bravin et al., 2006). Commercial confectionary coatings made with a variety of vegetable oils instead of cocoa butter were used for enrobing wheat and soy cereal bars, thus improving lightness and general acceptance of the product (Aramouni and Abu-Ghoush, 2010).


4. Oil-fried products

Deep fat fried products are very appealing to consumers due to a soft, moist interior covered with crispy crust, but can contain up to 50% fat. Some edible coatings, particularly those based on hydrophilic polymers, are a good barrier to fats and oils. This application has become increasingly important in recent years, as oil uptake in fried products has become a health concern, related to obesity and coronary disease (García et al., 2008). For example, coating potato strips with MC and HPMC edible coatings reduced oil uptake during frying by 35 – 40% without a significant influence on texture properties (Garcia et al., 2002), and gellan gum and guar gum coatings also showed promising results (Kim et al., 2011).


The use of edible films and coatings as suitable packaging for the food industry has become a topic of great interest because of their potential for increasing shelf life of food products. These coatings and films exhibit various functions when used, such as inhibition of the migration of moisture, oxygen, carbon dioxide, aromas, lipids, and so forth; the ability to carry food ingredients; and the ability to improve the mechanical properties of the food. Many functions of edible films and coatings are similar to those of synthetic packaging films; however, edible film and coating materials must be chosen for food packaging purpose according to specific applications, the types of food products, and the major mechanisms of quality deterioration. Biodegradable and/or edible films have the potential to reduce some traditional polymeric packaging materials for specific applications. However, in order to do so, bio-based packaging must perform like conventional packaging and provide all of the necessary functions of containment, protection, preservation, information, convenience ina legally and environmentally-compliant manner, cost-effectively.


This work is part of project „Osmotic dehydration of food - energy and environmental aspects of sustainable production“, project number TR-31055 (2011-2014) financed by Ministry of Education and Science Republic of Serbia.


Download full article PDF